武進高新技術產業開發區 
售前咨詢 ：
搜索
搜索
產品分類
全部分類
全部分類
T098 放大器
采用專業防水接頭，一進一出接線盒，多個信號集成。
● 補償調節采用高穩定型多圈電位器
● 蓋板有防水橡膠墊圈，防水，防塵，適用于環境條件惡劣的工業現場
● 防止感應雷和浪涌信號對傳感器的損壞
● 一進一出接線盒
● 多個信號集成
● Use special waterproof connector
● Compensation adjustment adopts high stability multi-turn potentiometer
● The cover plate has a waterproof rubber gasket, which is waterproof and dustproof, suitable for industrial sites with harsh environmental conditions
● Prevent damage to the sensor from induced lightning and surge signals
● One-in-one-out junction box
● Multiple signal integration
特點
● 采用專用防水接頭● 補償調節采用高穩定型多圈電位器
● 蓋板有防水橡膠墊圈，防水，防塵，適用于環境條件惡劣的工業現場
● 防止感應雷和浪涌信號對傳感器的損壞
● 一進一出接線盒
● 多個信號集成
● Use special waterproof connector
● Compensation adjustment adopts high stability multi-turn potentiometer
● The cover plate has a waterproof rubber gasket, which is waterproof and dustproof, suitable for industrial sites with harsh environmental conditions
● Prevent damage to the sensor from induced lightning and surge signals
● One-in-one-out junction box
● Multiple signal integration
T098H 放大器
電源與信號隔離，抗干擾能力強。
● 電源與信號隔離，抗干擾能力強
● 高精度，經篩選的精密運放、精密電阻
● 多級有源濾波處理，輸出信號穩定準確
● 適應多種靈敏度傳感器，零點可調范圍寬
● Collection of various output signals ±10V, 4-20mA, 0~20mA
● Power and signal isolation, strong anti-interference ability
● High precision, screened precision op amps, precision resistors
● Multi-stage active filter processing, the output signal is stable and accurate
● Adapt to a variety of sensitivity sensors, wide adjustable range of zero point
特點
● 集合多種輸出信號±10V，4-20mA，0~20mA● 電源與信號隔離，抗干擾能力強
● 高精度，經篩選的精密運放、精密電阻
● 多級有源濾波處理，輸出信號穩定準確
● 適應多種靈敏度傳感器，零點可調范圍寬
● Collection of various output signals ±10V, 4-20mA, 0~20mA
● Power and signal isolation, strong anti-interference ability
● High precision, screened precision op amps, precision resistors
● Multi-stage active filter processing, the output signal is stable and accurate
● Adapt to a variety of sensitivity sensors, wide adjustable range of zero point
T094W儀表
將測力信號轉換為數字通訊信號、標準模擬輸出信號及簡單控制場合。模擬輸出信號可選擇4~20mA、0~±10V。數字通訊接口可選擇RS485或者RS232，ModBus-RTU協議。
● 模擬輸出信號可以選擇 4~20mA、0~±10 V
● 數字通訊接口可選擇 RS485或者RS232
● 多種濾波調試模式，更容易獲取目標值
● 供電及信號均有隔離處理，抗干擾能力強，數據采集和輸出更穩定
● LED顯示實時重量值，峰值等
● 可比較輸出，峰值捕獲，峰值比較輸出
● 非砝碼標定，TEDS 自動校準
● 高速采樣（最高1600次）、顯示速度快
● 控制器電源采用隔離DC24V±10%，供電更加安全穩定
● 35mm標準工業導軌安裝
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● 35mm standard industrial rail installation
特點
● 用于需要測力信號轉換為數字通訊信號、標準模擬輸出信號及簡單控制場合● 模擬輸出信號可以選擇 4~20mA、0~±10 V
● 數字通訊接口可選擇 RS485或者RS232
● 多種濾波調試模式，更容易獲取目標值
● 供電及信號均有隔離處理，抗干擾能力強，數據采集和輸出更穩定
● LED顯示實時重量值，峰值等
● 可比較輸出，峰值捕獲，峰值比較輸出
● 非砝碼標定，TEDS 自動校準
● 高速采樣（最高1600次）、顯示速度快
● 控制器電源采用隔離DC24V±10%，供電更加安全穩定
● 35mm標準工業導軌安裝
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● 35mm standard industrial rail installation
T094H 儀表
將測力信號轉換為數字通訊信號、標準模擬輸出信號及簡單控制場合。數字通訊接口可選擇RS485或者RS232，ModBus-RTU協議。
● 標配一個串口 RS485或者RS232，支持Modbus-RTU協議
● 6位LED數碼管字高7.1mm，4個狀態指示燈
● 控制器帶有上限、中限、下限界限判斷功能
● 可選配最多8個輸出，8個輸入
● 5級動態數字濾波，200次/秒值比較速度
● 可通過上位機進行驅動控制器輸出，可部分替代PLC
● 標準工業導軌安裝（DIN）
● 適用于定值控制系統，檢重秤，包裝秤，過程力測量與控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
特點
● 用于需要測力信號轉換為數字通訊信號、標準模擬輸出信號及簡單控制場合● 標配一個串口 RS485或者RS232，支持Modbus-RTU協議
● 6位LED數碼管字高7.1mm，4個狀態指示燈
● 控制器帶有上限、中限、下限界限判斷功能
● 可選配最多8個輸出，8個輸入
● 5級動態數字濾波，200次/秒值比較速度
● 可通過上位機進行驅動控制器輸出，可部分替代PLC
● 標準工業導軌安裝（DIN）
● 適用于定值控制系統，檢重秤，包裝秤，過程力測量與控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
T093C 儀表
將測力信號轉換為數字通訊信號、標準模擬輸出信號及簡單控制場合。模擬輸出信號可選擇4~20mA、0~±10V。數字通訊接口可選擇RS485或者RS232，ModBus-RTU協議。
● 14位模擬輸出信號可以選擇 4~20mA、0~±10 V
● 數字通訊接口可選擇 RS485或者RS232
● 多種濾波調試模式，更容易獲取目標值
● 供電及信號均有隔離處理，抗干擾能力強，數據采集和輸出更穩定
● LED顯示實時重量值，峰值等
● 可比較輸出，峰值捕獲，峰值比較輸出
● 非砝碼標定，TEDS 自動校準
● 高速采樣（最高1600次）、顯示速度快
● 控制器電源采用隔離DC24V±10%，供電更加安全穩定
● 面板式安裝，操作簡單
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● 14-bit analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● Panel installation, easy operation
特點
● 用于需要測力信號轉換為數字通訊信號、標準模擬輸出信號及簡單控制場合● 14位模擬輸出信號可以選擇 4~20mA、0~±10 V
● 數字通訊接口可選擇 RS485或者RS232
● 多種濾波調試模式，更容易獲取目標值
● 供電及信號均有隔離處理，抗干擾能力強，數據采集和輸出更穩定
● LED顯示實時重量值，峰值等
● 可比較輸出，峰值捕獲，峰值比較輸出
● 非砝碼標定，TEDS 自動校準
● 高速采樣（最高1600次）、顯示速度快
● 控制器電源采用隔離DC24V±10%，供電更加安全穩定
● 面板式安裝，操作簡單
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● 14-bit analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● Panel installation, easy operation
T089 儀表
將測力信號轉換為數字通訊信號、標準模擬輸出信號及簡單控制場合。數字通訊接口可選擇RS485或者RS232，ModBus-RTU協議。
● 標配一個串口 RS485或者RS232，支持Modbus-RTU協議
● 6位LED數碼管字高7.1mm，4個狀態指示燈
● 控制器帶有上限、中限、下限界限判斷功能
● 可選配最多8個輸出，8個輸入
● 5級動態數字濾波，200次/秒值比較速度
● 可通過上位機進行驅動控制器輸出，可部分替代PLC
● 標準工業導軌安裝（DIN）
● 適用于定值控制系統，檢重秤，包裝秤，過程力測量與控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
特點
● 用于需要測力信號轉換為數字通訊信號、標準模擬輸出信號及簡單控制場合● 標配一個串口 RS485或者RS232，支持Modbus-RTU協議
● 6位LED數碼管字高7.1mm，4個狀態指示燈
● 控制器帶有上限、中限、下限界限判斷功能
● 可選配最多8個輸出，8個輸入
● 5級動態數字濾波，200次/秒值比較速度
● 可通過上位機進行驅動控制器輸出，可部分替代PLC
● 標準工業導軌安裝（DIN）
● 適用于定值控制系統，檢重秤，包裝秤，過程力測量與控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
T098D 放大器
將測力信號轉換為數字通訊信號、標準模擬輸出信號及簡單控制場合。模擬輸出信號可選擇4~20mA、0~±10V數字通訊接口可選擇RS485或者RS232，ModBus-RTU協議。
● 模擬輸出信號可以選擇 4~20mA、0~±10 V
● 數字通訊接口可選擇 RS485或者RS232
● 多種濾波調試模式，更容易獲取目標值
● 供電及信號均有隔離處理，抗干擾能力強，數據采集和輸出更穩定
● 可比較輸出，峰值捕獲，峰值比較輸出
● 非砝碼標定，TEDS自動校準
● 高速采樣（最高1600次）、顯示速度快
● 控制器電源采用隔離DC24V ±10%，供電更加安全穩定
● 35mm 標準工業導軌安裝
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V ±10%, the power supply is more secure and stable
● 35mm standard industrial rail mounting
特點
● 用于需要測力信號轉換為數字通訊信號、標準模擬輸出信號及簡單控制場合● 模擬輸出信號可以選擇 4~20mA、0~±10 V
● 數字通訊接口可選擇 RS485或者RS232
● 多種濾波調試模式，更容易獲取目標值
● 供電及信號均有隔離處理，抗干擾能力強，數據采集和輸出更穩定
● 可比較輸出，峰值捕獲，峰值比較輸出
● 非砝碼標定，TEDS自動校準
● 高速采樣（最高1600次）、顯示速度快
● 控制器電源采用隔離DC24V ±10%，供電更加安全穩定
● 35mm 標準工業導軌安裝
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V ±10%, the power supply is more secure and stable
● 35mm standard industrial rail mounting
上一頁
1
下一頁
